4-4-4-6 Copper SER Service Entrance Cable
SER is a type SE (service entrance), Style R (reinforcement tape) cable, used as an above ground service entrance cable, a panel feeder and in branch circuits. It is most often used to deliver power from the service drop down to the meter base, and from the meter base to the distribution panel board.
Insulated Conductor Size: 4 AWG
Bare Ground Size: 6 AWG (7)
Outside Diameter: 0.80 inches
Ampacity amps 95 @ 90°C
Net Weight: .585 lbs/ft
*Data provided on this page is subject to change based on different manufacturers variances.
Back Order. Please contact us at 650-829-5996 or firstname.lastname@example.org for ordering.
discount on large quantities or bulk purchasing
Out of stock
Type SE, Style SER Service Entrance may be used as service-entrance conductors and in other applications where SE cables are permitted when installed as specified by NEC® dry locations at temperatures up to 90°C.
Stranded conductors: Uncoated copper per ASTM-B3, ASTM-B8, and ASTM-B787
Type THHN conductors Black PVC (polyvinyl chloride), rated to 90°C in wet or dry locations Jacketed with black nylon (polyamide) One phase conductor has a red stripe on its insulation surface for easy polarity identification.
White PVC (polyvinyl chloride), rated 90°C Jacketed with white nylon (polyamide)
Equipment Ground Conductor:
Bare stranded copper conductor
Gray, sunlight-resistant PVC (polyvinyl chloride) jacket over the complete assembly
UL 83 (insulated conductors)
UL 854 Service Entrance Cables, File No. 11098
Federal Specification A-A-59544
NFPA70: National Electrical Code